Great Plains CTA4000 HD Operator Manual - Manual (Page 9)

Great Plains Manufacturing, Inc. Important Safety Information 5
2012-11-28 160-037M
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request
corresponding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-055C
Slow Moving Vehicle Reflector
Center of rear frame tube;
1 total
838-266C
Red Reflectors
On each of two spindle tubes of the rear casters,
on rear face of each wing near pivot,
on rear face of rear lift-assist side braces;
6 total
17160
17153