Great Plains 3P600 Operator Manual - Manual (Page 38)

Table of Contents Index 2011-10-21
34 3P500, 3P500V & 3P600 Table of Contents Index Great Plains Manufacturing, Inc.
Options
Accessories are listed in alphabetical order. To order an
accessory, contact your Great Plains dealer.
Acremeter
An electronic acremeter is standard on new drills. If you
need a replacement meter, a meter with an alternate
units of measure, or have an older drill without an
electronic acremeter, order one of the following parts.
See “Acremeter Operation” on page 16.
Calibration Kits
Field installation kits are available to upgrade drills
manufactured prior to October 2005. This provides a
replacement jackshaft, and adds a calibration crank,
allowing operating of the meter shafts without needing to
rotate the gauge wheel tire.
Note: Calibration cranks are standard on new compact
drills.
Carbide Disc Scraper
Slotted scrapers are standard.
Optional carbide disc scrapers are spring-loaded and
require no periodic adjustment. Scrapers are compatible
with the standard seed flap and Seed-Lok
®
, but not
Keeton
®
.
See “Carbide Disc Scraper Installation” on page 46.
Drill Model Units Part Number
3P500 891-001C
3P500 891-002C
3P500V acres 891-001C
3P500V hectares 891-002C
3P600 891-003C
3P600 891-004C
27378
Drill Kit
Part
Number
3P500,
3P500V
3P500 CALIBRATION KIT
152-306A
3P600 3P600 CALIBRATION KIT 152-305A
23393
Description Part Number
SPRING SCRAPER ASSEMBLY 121-781A
19000