Great Plains 7344 Series VII Field Cultivator-Rigid Hitch Operator Manual User Manual
Manufacturing, inc, Operator’s manual
Advertising
©Copyright
2003
Printed
1/31/2005
560-198M
Operator’s Manual
Series VII 7332, 7334, 7337, 7341 & 7344
Field Cultivator, Rigid Hitch (Constant Level)
Manufacturing, Inc.
Read the operator’s manual entirely. When you see this symbol, the subsequent
instructions and warnings are serious - follow without exception. Your life and the
lives of others depend on it.
Cover illustration may show optional equipment not supplied with standard unit.
!
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Field Cultivator, Rigid Hitch
- Operator’s Manual
- Table of Contents
- Important Safety Information
- Introduction
- Section 1: Assembly
- Center Torque Tube & Walking Beam Assembly
- Inside Wing and Wheel Arm Assembly
- Brace Bar and Wing Brace Assembly
- Rocker Bracket and Center Fold Bracket Assembly
- Flip Over Wing Assembly
- Center Truss, Hitch and Strut Assembly
- Hitch Tongue, Side Plate and Level Bar Assembly
- Center Lift Cylinder, Bolt on Stubs and Hydraulic Valves Assembly
- Fold Cylinders, Rocker Arm and 3” Rollers Assembly
- Center Wing Stop / Outside Wing Stop Assembly
- Gauge Wheel Assembly (optional equipment)
- Completing Setup
- Section 2: Hydraulics
- Section 3: Replacement Parts
- Section 4: Shank Placement
- Section 5: Operating and Maintenance
- Section 6: Specifications and Capacities
- Appendix