Introduction, Description of unit, Using this manual – Great Plains 7344 Series VII Field Cultivator-Rigid Hitch Operator Manual User Manual
Page 14: Owner assistance, Description of unit using this manual, Definitions
Series VII 7332-7344 Field Cultivator, Rigid Hitch 560-198M
1/23/2003
12
Introduction
Great Plains welcomes you to its growing family of
new product owners. This implement has been
designed with care and built by skilled workers
using quality materials. Proper assembly,
maintenance and safe operation will help you get
years of satisfactory machine use from your
machine. To ease the assembly task and produce
a properly working machine, read this entire
manual before assembling or setting up new
equipment.
Description of Unit
The Series VII 7332, 7334, 7337, 7341 & 7344
Field Cultivator is a 3-section seedbed preparation
tillage tool. Working width is 32 to 44 feet. The
implement is designed for secondary field
operations to smooth, level, eliminate weeds and
incorporate chemicals. Various finishing
attachments are available to further smooth,
redistribute residue, firm soil and break clods.
Using This Manual
This manual will familiarize you with safety,
assembly, operation, adjustment, troubleshooting
and maintenance. Read this manual and follow
the recommendations to help ensure safe and
efficient operation.
The information in this manual is current at print-
ing. Some parts may change to assure top
performance.
Definitions
The following terms are used throughout this
manual.
Right and left as used in this manual are deter-
mined by facing the direction the machine will
travel while in use unless otherwise stated.
IMPORTANT: A crucial point of information
about the preceding topic. For safe and correct
operation, read and follow the directions provided
before continuing.
NOTE: Useful information about the preceding
topic.
Owner Assistance
If customer service or repairs are needed, contact
your Great Plains dealer. They have trained
personnel, parts and service equipment specially
designed for Great Plains products.
Your machine’s parts should only be replaced with
Great Plains parts. Always use the serial and
model number when ordering parts from your
Great Plains dealer. The serial-number plate is
on the center section of the implement on the front
frame tube.
Record your implement model and serial numbers
here for quick reference.
Model Number: __________________________
Serial Number: ___________________________
Your Great Plains dealer wants you to be satisfied
with your new machine. If you do not understand
any part of this manual or are not satisfied with
the service received, please take the following
actions:
1. Discuss the matter with your dealer’s service
manager. Make sure they are aware of any
problems so they can assist you.
2. If you are still not satisfied, seek out the
dealership owner or general manager.
3. For further assistance, write to:
Product Support
Great Plains Mfg. Inc.
Service Department
607 Main Street
Tipton, KS 67485