Great Plains 7344 Series VII Field Cultivator-Rigid Hitch Operator Manual - Manual (Page 25)

Great Plains Mfg., Inc. Table of Contents ►
Section 1: Assembly
1/31/2005 Series VII 7332-7344 Field Cultivator, Rigid Hitch 560-198M
23
Gauge Wheel Assembly (optional equipment)
U-bolt the gauge wheel bracket (1) to
the front bar of inside wing brace as shown in
figure 12 using the 5/8 x 4 x 4¼ u-bolts (2),
lock washers and hex nuts. Slide the gauge
wheel arm/hub assembly (3) up into the gauge
wheel bracket (1) and pin with the ¾ x 4½ pin
(4). Use four ½ x 1 hex bolts (5) to secure the
arm and make it rigid. Bolt on the 4-bolt rim
and tire (6) with four ½ x 1 lug bolts (7).
Figure 12