B&G H2000 Pilot *DISCONTINUED* - Manual (Page 136)

h2000 Autopilot User Manual
Part 6 - Diagnostic Data
HB-0842-04
6-12
6.2.11 Fault 111 - Current Trip
Fault Description
The current limit circuit for the drive motor (25 Amps
ACP1 or 40 Amps ACP2) or the clutch (2 Amps) has
tripped.
Remedy
(1) Check installation and wiring for short circuits.
(2) Check current to clutch, maximum available 2 Amps.
(3) Check current to drive motor, maximum available 25
Amps (ACP1) or 40 Amps (ACP2).
6.2.12 Fault 112 - Network
Fault Description
No regular messages being received by pilot control from
pilot display via instrument system network, i.e. either the
display is not transmitting or the autopilot computer is not
receiving.
Remedy
(1) If it is a new system that has never worked, check
software of display:
- Hydra autopilot display, version 4.2 or later.
(2) If other displays show autopilot data, check
installation and operation of autopilot display.
(3) If autopilot responds to commands from other
displays then autopilot computer is operating correctly.
(4) Check installation of network cable.