B&G H2000 Pilot *DISCONTINUED* - Manual (Page 35)

h2000 Autopilot User Manual
Part 2 - Operating Information
HB-0842-04
2-23
2.8 SET-UP OPTIONS
The Hydra and Hercules Autopilots have eleven common set-up
options, however if a Halcyon Gyro Stabilised Compass and its
associated processor are installed into the Autopilot system,
additional set-up options become available. All set-up options are
used to change and select the operating modes, steering
characteristics and alarms of the Autopilot System, whether it is
fitted to a powerboat or a sailing boat.
The Set-up Menu is accessed by pressing the key next to the
SETUP legend on any Autopilot Display Unit, and is available
when the Autopilot is either engaged or disengaged in any steering
mode.
When the Set-up Menu is displayed, the set-up options can be
listed, changed and entered in to the Autopilot memory. The
diagram below shows a typical display when using the Set-up
Menu.
To exit the Set-up Menu following completion of the set-up
procedures described in the Paragraphs 2.8.1 to 2.8.12 press the
key next to the EXIT legend. The LCD will return to the previous
display before selection of the Set-up Menu.