B&G H2000 Pilot *DISCONTINUED* - Manual (Page 31)

h2000 Autopilot User Manual
Part 2 - Operating Information
HB-0842-04
2-19
2.6.3 Engaging the Autopilot
Note
The rudder should be in the amidships position (or the position at
which the boat steers a straight course) before the Power Key is
pressed.
(1) At any Autopilot Display, press the key next to the
POWER legend to engage the Autopilot.
(2) At the Hand-held Controller press the Auto/Resume
Key to engage the Autopilot with the Hand-held
Controller.
2.6.4 Dis-engaging the Autopilot
(1) At the Autopilot Display press the Red Off Key. The
Autopilot immediately disengages and returns to manual
steering.
(2) At the Hand-held Controller press the Red Off Key.
The Autopilot immediately disengages and returns to
manual steering.
2.6.5 Fine Rudder Adjustments
(1) At the Autopilot Display press the > Key next to the
legend < > to move the rudder to starboard in steps of
0.6
o
.
(2) Press the < Key next to the legend < > to move the
rudder to port in steps of 0.6
o
.
(3) At the Hand-held Controller press the 1
o
Keys to
move the rudder to port or starboard in steps of 0.6
o