Bio-Rad PDS-1000 / He™ and Hepta™ Systems - Manual (Page 10)

Tools
3 Hexagonal gap setting tools (1 each- 1/8", 1/4", and 3/8"), used to set gap between the
bottom of the rupture disk retaining cap and the lid of the microcarrier launch assembly
1 3/16" hex key (Allen) wrench, used for removal of gas acceleration tube (service only)
1 1/8" hex key (Allen) wrench, used for releasing set screw in microcarrier launch assembly shelf
2 1/4" x 5/16" open-end wrenches, used for connecting small Swagelock fittings of plastic
PEEK tubing to rear of instrument, external solenoid valve, and helium pressure regulator
1 torque wrench for rupture disk retaining cap
1 seating tool for macrocarriers
Fig. 2.4. PDS-1000/He tools.
7