Bio-Rad PDS-1000 / He™ and Hepta™ Systems - Manual (Page 19)

Fig. 3.2. Components used to connect vacuum source to main unit.
3.3 Power Cord / Voltage Regulator
The power cord must be plugged directly into a 100 V-120 V outlet. Plug other end into
unit. For use with a 220 V or 240 V line voltage (users outside the US or Canada), connect a
voltage converter to the power cord prior to use (catalog number 165-2259, see Figure 3.3).
You must supply a cord set that has an IEC-320/CEE-22 connector on the end that attaches
to the voltage converter; the other end of the cord set will terminate with a plug that is com-
patible with the electrical outlets in your area.
Fig. 3.3. Voltage converter.
16
Clamping Ring
Centering Ring
Vacuum tubing
Male Pipe Adaptor
Quick Flange
Adaptor