Bio-Rad Mini Trans-Blot® Cell - Manual (Page 3)

Mini-Trans-Blot Electrophoretic Transfer Cell i
Assembly and Disassembly
To insure best performance from the Mini Trans-Blot
®
electrophoretic transfer cell, become fully acquainted
with these operating instructions before using the cell
to transfer samples. Bio-Rad recommends that you first
read these instructions carefully. Then assemble and
disassemble the cell completely. After these preliminary
steps, you should be ready to transfer a sample.
Wash Cell Before Use
Bio-Rad also recommends that all Mini Trans-Blot
electrophoretic transfer cell components and accessories
be cleaned with a suitable laboratory cleaner (such as
Bio-Rad Cleaning Concentrate, catalog #161-0722) and
rinsed thoroughly with distilled water before use.
Warranty
Bio-Rad Laboratories warrants the Mini Trans-Blot
electrophoretic transfer cell against defects in materials
and workmanship for 1 year. If any defects occur in
the instrument during this warranty period, Bio-Rad
Laboratories will repair or replace the defective parts free.
The following defects, however, are specifically excluded:
1. Defects caused by improper operation.
2. Repair or modification done by anyone other than
Bio-Rad Laboratories or an authorized agent.
3. Use of fittings or other spare parts supplied by anyone
other than Bio-Rad Laboratories.
4. Damage caused by accident or misuse.
5. Damage caused by disaster.
6. Corrosion due to use of improper solvent or sample.
For any inquiry or request for repair service, contact
Bio-Rad Laboratories after confirming the model and serial
number of your instrument.