Bio-Rad PowerPac™ Universal Power Supply User Manual
Page 22
Step Procedure
Description
2.
Open a method
There are three ways to open a method:
a.
Press New Method to create and open a
new method.
b.
Select a method from the drop-down
method list and press Edit. Note that the
Edit and Beam buttons appear only if a
method from the method list has been
selected.
c.
Press Beam Current Method In to
retrieve a method from the PowerPac
Universal and store it in the method list.
Note: the method in the PowerPac
Universal has to be opened before
transmission.
Other Buttons
Purge Methods: Used to delete ALL
methods stored on the PDA
Beam: Transmits the currently selected
method to the PowerPac Universal
Done: Returns to the start-up screen.
3.
Edit the method
Press Select/Edit Methods..., select the
method from the drop-down method list and
press Edit.
Select a step to edit from the Method Steps
drop-down menu.
16
Existing Methods
Done
Beam Current Method In
Edit
Beam
Sample
New Method
Purge Methods
Method: SDS-PAGE
Method Steps
Rename
Save
Delete
Beam
Methods
Delete Step
S 1 100V 2500mA 500W UNTIMED
S 2 ---Blank Step---