Bio-Rad PowerPac™ Universal Power Supply - Manual (Page 24)

Step Procedure Description
2. Receive data from the Press Get Data From PowerPac to request
PowerPac Universal and receive the data file from the PowerPac’s
most recent run.
Other Buttons
Purge Data: Used to delete ALL data stored
on the PDA
Done: Returns to the start-up screen.
3. Transmit data to a PC Select a data file from the drop-down Run
Data list and then press Beam to transmit the
data to a PC. The warning "This data file has
not been beamed to the PC" is displayed for
all data files that have not been transmitted to
a PC. Note that the Extract Method, Beam
and Delete buttons appear only if a run in the
Run Data list has been selected.
Other Buttons
Purge Data: Used to delete ALL data stored
on the PDA
Extract Method: Displays the method that
was used to create the selected run data.
Beam: Transmits data to a PC
Delete: Deletes the currently selected data
file.
Done: Returns to the start-up screen.
18
Run Data
Collected Run Data
Done
Purge Data
Get Data From PowerPac
Collected Run Data
Done Beam Delete
Get Data From PowerPac
SN 00002 15:56:05 27-May-03
This data file has not been
beamed to the PC
Purge Data Extract Method