Bio-Rad Image Lab™ Software - Manual (Page 27)

Installing the Drivers on a Windows 7 Computer
User Guide | 27
A message appears briefly: Your new hardware is ready to use.
Note: Windows XP might prompt you to go through the driver installation a
second time. If this happens, repeat this section until you receive the message
“Your new hardware is ready to use.”
Installing the Drivers on a Windows 7 Computer
If you are running Windows 7, the device driver is installed during the Image Lab
installation process. After successful installation, you see a message similar to the
following.
Note: During the installation process you might see a warning similar to the
following. You can ignore this warning because it appears even when the driver
has been installed correctly.