Bio-Rad Image Lab™ Software - Manual (Page 30)

2 | Setting Up the Instrument with Image Lab Software
30 | GS-900 Calibrated Densitometer with Image Lab Software
After the final calibration completes, the Setup Summary dialog box appears.
By default, you are prompted to set up a default protocol. Clear this checkbox if
you do not want to perform this task at this time.
Tip: See Chapter 4, Acquiring Images , to configure the default protocol
that runs when you press the green button on the densitometer.
7. Click Finish.
Setting Up Image Lab Security Edition
Activating and Deactivating Security Edition
 Before you activate or deactivate Image Lab Security Edition, close any
open document files.
 After you change the active status of the Security Edition, you must restart
Image Lab.
To activate the Security Edition via the Internet
1. Double-click the Image Lab icon on your desktop to open Image Lab.