Bio-Rad Image Lab™ Software - Manual (Page 92)

5 | Viewing Images
92 | GS-900 Calibrated Densitometer with Image Lab Software
Image Info
The Image Info dialog box provides information about the active image.
The dialog box has four tabs.
 Image Details — acquisition and image information appear in this tab.
 Analysis Settings — settings that were used when the gel was analyzed
are displayed here. For example, Band Detection and Molecular Weight
Analysis will appear if they were performed.
 Calibration Report — results of the step-tablet calibration against which
to compare the results of the gel scan. The values in the OD Values column
are the factory settings.
Tip: You can print the Calibration Report data in the image report by
selecting the Calibration Report checkbox in the Report Settings dialog
box.
 Notes — on this tab you can add notes, point out the types of samples
used, and add any other information about the results. You can create
custom labels for the lanes in your image.
Displaying Data
You can view results from analyzed data associated with a gel image using an
analysis table, a lane profile, a standard curve, or a report.
The buttons in the main toolbar turn these views on or off. You can view your data
with all views simultaneously.