Fig. 2. connecting to a mv-6 valve, Fig. 1. biologic lp setup. 6 – Bio-Rad Bio-Scale™ Mini CHT™ 40 µm Cartridges User Manual
Page 7
![background image](/manuals/600417/7/background.png)
2. To maximize gradient accuracy and apply
samples efficiently, install 1.6 mm ID tubing from
the pump to the MV-6 sample inject valve (if
available). If using the MV-6 sample inject valve,
turn the knob counterclockwise as far as it will
go so it will correspond to the printed diagram
on the valve. (Figure 2).
Fig. 2. Connecting to a MV-6 Valve.
TO
COLUMN
TO
BIOLOGIC LP
SYSTEM OR ECONO
GRADIENT PUMP
TO
BIOLOGIC LP
SYSTEM OR ECONO
GRADIENT PUMP
MV-6
INJECT
VALVE
SAMPLE LOOP
WASTE
INJECT
PORT
FILL
TO
COLUMN
MV-6
INJECT
VALVE
SAMPLE LOOP
WASTE
INJECT
PORT
FILL
"INJECT" POSITION
"FILL" POSITION
7
(Use orange lock rings and medium size barb
fittings with 1.6 mm tubing.)
Fig. 1. Biologic LP setup.
6
1
Ala
rm
2
3
4
5
6
7
8
0
9
C
.
Platen pressure
screw
Lock-ring
Tubing
Luer fittimg
See detail
10011433A.qxp 10/30/2007 8:21 AM Page 6