Bio-Rad Nuvia™ S Media User Manual
Page 11
Advertising
![background image](/manuals/600511/11/background.png)
7
3. To maximize gradient accuracy and apply
samples efficiently, install 1.6 mm ID tubing
from the pump to the MV-6 sample inject
valve (if available). If using the MV-6 sample
inject valve, turn the knob counterclockwise
as far as it will go so it corresponds to the
diagram on the valve (Figure 2).
Fig. 2. Connecting to an MV-6 valve.
To BioLogic
LP system or
Econo gradient
pump
To BioLogic
LP system or
Econo gradient
pump
Advertising