Module bay – Dell OptiPlex 760 User Manual
Page 179
Back to Contents Page
Dell™ OptiPlex™ 760 Service Manual
Module Bay
You can install a Dell™ removable device such as a floppy drive, optical drive, or second hard drive in the module bay. You can also install an airbay (filler blank)
in the bay if you do not plan to install a drive.
Your Dell computer ships with either an optical drive or an airbay (filler blank) installed in the module bay. The airbay is held in the module bay with a security
screw only. You can secure a optical drive in the module bay using two methods:
l
Locking switch (accessed by removing the computer cover)
l
Security screw (packaged separately)
Securing a Device in the Module Bay
for more information about securing a device in your computer.
Removing and Installing a Device When Your Computer Is Turned Off
1.
If the module bay contains a device that is locked with the locking switch:
a.
Remove the cover (see
Removing the Computer Cover
)
b.
Lift the module locking switch to the unlocked position.
2.
If the module bay contains an airbay, remove the security screw and pull the airbay out of the module bay and skip to
.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To prevent damage to devices, place them in a safe, dry place when they are not installed in the computer. Avoid pressing down on
them or placing heavy objects on top of them.
1 module locking switch