Optical drive – Dell OptiPlex 760 User Manual
Page 91
4.
Attach the cable to the media card reader and to the system board.
5.
Replace the computer cover (see
Replacing the Computer Cover
).
6.
Verify that your computer works correctly by running the Dell Diagnostics (see
Dell Diagnostics
).
Optical Drive
Removing an Optical Drive
1.
Follow the procedures in
Working on Your Computer
.
2.
Remove the computer cover (see
Removing the Computer Cover
).
3.
Disconnect the power and data cables from the back of the drive and system board.
1
media card reader
2
shoulder screws (4)
3
shoulder screw slots (2)
1
data/power cable
2
media card reader
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING:
To guard against electrical shock, always unplug your computer from the electrical outlet before replacing the cover.