Dell OptiPlex 760 - Manual (Page 92)

4. Grasp the sliding plate lever and slide it downwards until the drive panel snaps open; while holding the lever down, slide the drive out of the computer.
Installing an Optical Drive
1. Follow the procedures in Working on Your Computer .
2. Remove the computer cover (see Removing the Computer Cover ).
3. If you are replacing an optical drive, remove the shoulder screws from the existing drive and attach the screws to the replacement drive.
4. If you are installing a new optical drive, remove the drive-panel insert, remove the shoulder screws from the inside of the drive-panel insert, and attach
the screws to the new drive.
5. Check the documentation that accompanied the drive to verify that the drive is configured for your computer.
6. Align the shoulder screws on the optical drive with the shoulder screw slots, and slide the drive into the bay until it clicks into place.
1 optical drive 2 drive release latch
1 optical drive 2 shoulder screws (3)