Installing the control panel assembly, D. see figure 3-35 – Dell POWEREDGE 2950 User Manual
Page 106
Advertising
106
Installing System Components
b
Using a T10 Torx driver, remove the two screws that secure the display module to the system
chassis.
c
Remove the display module from the chassis cutout.
Figure 3-35.
Control Panel Removal
Installing the Control Panel Assembly
1 Insert the display module into the chassis cutout and secure with the two Torx screws.
2 Affix the display module label to the display module.
3 Install the control panel board in the system chassis and secure with the three Phillips screws. See
5
6
2
1
3
4
7
1
display module label
2
display module securing
screws (2)
3
display module
4
display module cable
5
control panel cable
6
control panel circuit board
7
control-panel circuit board
securing screws (3)
Book.book Page 106 Friday, February 3, 2006 11:09 AM
Advertising