Removing a raid battery – Dell POWEREDGE 2950 User Manual
Page 75
Advertising
Installing System Components
75
Figure 3-17.
Installing a RAID Battery
Removing a RAID Battery
1 Disconnect the cable between the RAID battery and the SAS RAID controller daughter card. See
2 Press down and to the left on the battery carrier to disengage the carrier from the chassis battery carrier
slots.
3 Gently pulling back the two guides holding the RAID battery into the battery carrier, draw out the
RAID battery from the battery carrier.
1
chassis battery carrier slot (2)
2
battery cable
3
battery carrier
4
SAS RAID controller daughter
card battery
1
3
4
2
Book.book Page 75 Friday, February 3, 2006 11:09 AM
Advertising