Dako Hybridizer - Manual (Page 12)

12 Dako Hybridizer | Handbook
Audible Indicators
Single beep – on all legal keystrokes.
Two quick beeps – upon accepting a field and cursor has moved to the next field.
Five beeps at 0.5 second interval – completion of process.
Audible Error Indicators
Three short beeps – Entering of illegal or non-functioning keystrokes.
Low tone beep – Attempt to enter a value out of acceptable range.
Continuous beep – Instrument is not performing within acceptable range or program condition. Turn off
main power and restart. If beep persists discontinue use and contact Dako Customer
Service.
Error Messages
Instrument cannot achieve a set temperature by heating within 10 minutes an error message appears to
inform user to turn unit off and call service. A constant beep will sound.
If the instrument cannot measure the temperature, the software will automatically turn off the heating. An
error message will appear to inform the user to turn off the unit and call service. A constant beep will
sound.
SYSTEM ERROR!
TURN UNIT OFF! CALL
SERVICE
SYSTEM ERROR!
TURN UNIT OFF! CALL
SERVICE