Dako Hybridizer - Manual (Page 24)

24 Dako Hybridizer | Handbook
Upon program completion Hybridizer will beep five times and the display will show “Process Complete”.
Hybridization temperature will be maintained until “End PGM/Main Menu” is accepted by pressing
“Enter” button. Before pressing “Enter” button, remove slides for further processing. If “End PGM/Main
Menu” is not accepted within the first minute of program completion, hybridization time will start counting
the total time at hybridization temperature.
Run a Fixed Temp Program
Turn unit on and wait for the Main Menu screen. Cursor highlights “Run a PGM” line. Press “Enter”
button to accept.
With the arrow keys scroll through the program numbers 1 to 40 / program names. If no programs have
been saved advance to programming section of this handbook. To accept a program number/name,
press the “Enter” button.
Display will confirm PGM number/name and Fixed Temp. Cursor highlights “Run PGM” line.
Press “Enter” button. Instrument will heat to fixed temperature.
PGM 02 EBV
PROCESS COMPLETE
Total Hyb Time 02:15
End PGM/Main Menu
Enter PGM no.
or Scroll (arrows)
PGM 01 HER2
PGM 03 Appl
Fixed: 65°C
Run PGM
Main Menu
Please Wait
Heating to Fxd 65
° C
Present Temp: 47
° C