Switch operation -27 – NISSAN 2015 Murano - Owner's Manual User Manual
Page 114
![background image](/manuals/602762/114/background.png)
If the windshield wiper operation is interrupted by
snow or ice, the wiper may stop moving to protect
its motor. If this occurs, turn the wiper switch to
the OFF position and remove the snow or ice that
is on and around the wiper arms. In approximately
1 minute, turn the switch on again to operate the
wiper.
SWITCH OPERATION
The windshield wiper and washer operates when
the ignition switch is in the ON position.
Push the lever down to operate the wiper at the
following speed:
᭺
1
Intermittent (INT) — intermittent operation
can be adjusted by turning the knob toward
᭺
A
(Slower) or
᭺
B
(Faster).
᭺
2
Low (LO) — continuous low speed operation
᭺
3
High (HI) — continuous high speed opera-
tion
Lift the lever up
᭺
4
to have one sweep operation
(MIST) of the wiper.
Pull the lever toward you
᭺
5
to operate the
washer. The wiper will also operate several times.
LIC3028
Instruments and controls
2-27