NISSAN 2015 Murano - Owner's Manual User Manual

Page 287

Advertising
background image

The stoplights of the vehicle come on when
braking is performed by the ICC system.

When the brake operates, a noise may be
heard. This is not a malfunction.

When a vehicle ahead is detected, the vehicle
ahead detection indicator comes on. The ICC
system will also display the set speed and se-
lected distance.

Vehicle ahead not detected:

When a vehicle is no longer detected ahead, the
ICC system gradually accelerates your vehicle to
resume the previously set vehicle speed. The ICC
system then maintains the set speed.

When a vehicle is no longer detected the vehicle
ahead detection indicator turns off.

If a vehicle ahead appears during acceleration to
the set vehicle speed or any time the ICC system
is in operation, the system controls the distance
to that vehicle.

When a vehicle is no longer detected under
approximately 15 MPH (24 km/h), the system will
be canceled.

When passing another vehicle, the set speed
indicator

B

will flash when the vehicle speed

exceeds the set speed. The vehicle detect indi-
cator will turn off when the area ahead of the
vehicle is open. When the pedal is released, the
vehicle will return to the previously set speed.

Even though your vehicle speed is set in the ICC
system, you can depress the accelerator pedal
when it is necessary to accelerate your vehicle
rapidly.

How to change the set vehicle speed

To cancel the preset speed, use any of these
methods:

● Push the CANCEL switch. The set vehicle

speed indicator will go out.

● Tap the brake pedal. The set vehicle speed

indicator will go out.

● Turn the CRUISE ON/OFF switch off. The

ICC indicators will go out.

To reset at a faster cruising speed, use one of
the following methods:

● Depress the accelerator pedal. When the

vehicle attains the desired speed, push and
release the SET/COAST (–) switch.

● Push and hold the RES/ACCELERATE (+)

switch. The set vehicle speed will increase
by approximately 5 MPH (5 km/h for
Canada).

● Push,

then

quickly

release

the

RES/ACCELERATE (+) switch. Each time
you do this, the set speed will increase by
approximately 1 MPH (1 km/h for Canada).

LSD2255

5-42

Starting and driving

Advertising