Armrests -6 – NISSAN 2015 Murano - Owner's Manual User Manual

Page 25

Advertising
background image

Reclining

Pull the reclining strap

A

and position the seat-

back at the desired angle. Release the reclining
strap after positioning the seat at the desired
angle.

The reclining feature allows adjustment of the
seatback for occupants of different sizes to help
obtain proper seat belt fit. For additional informa-
tion, refer to “Precautions on the seat belt usage”
in this section. The seatback may also be reclined
to allow occupants to rest when the vehicle is
parked.

WARNING

After adjustment, check to be sure the

seat is securely locked.

Do not ride in a moving vehicle when

the seatback is reclined. This can be
dangerous. The shoulder belt will not
be against your body. In an accident,
you could be thrown into it and receive
neck or other serious injuries. You
could also slide under the lap belt and
receive serious internal injuries.

For the most effective protection when

the vehicle is in motion, the seat should
be upright. Always sit well back in the
seat with both feet on the floor and
adjust the seat belt properly. For addi-
tional information, refer to “Precau-
tions on seat belt usage” in this section.

ARMRESTS

The rear bench center armrest is locked in the up
position. To lower the armrest, pull the armrest
down.

To return the armrest to the up position, push up
on the armrest until it is in the full up position.

LRS2635

LRS2588

1-6

Safety—Seats, seat belts and supplemental restraint system

Advertising