NISSAN 2015 Murano - Owner's Manual User Manual

Page 157

Advertising
background image

NOTE:

The unlocking operation can be changed in
Selective door unlock in the Vehicle Set-
tings of the vehicle information display. For
additional information, refer to “Vehicle in-
formation display” in the “Instruments and
controls” section of this manual.

NOTE:

If Selective Unlock is turned off in the Ve-
hicle Settings, all doors will unlock upon
the first

press of the Intelligent Key

remote.

All doors will be locked automatically unless one
of the following operations is performed within
one minute after pressing the

button:

● Opening any doors.
● Pushing the ignition switch.

The interior light illuminates for a period of time
when a door is unlocked and the room light
switch is in the DOOR position.

The light can be turned off without waiting by
performing one of the following operations:

● Placing the ignition switch in the ON posi-

tion.

● Locking the doors with the Intelligent Key.

● Switching the room light switch to the OFF

position.

● Switching the Auto Room Lamp to the OFF

position in Vehicle Settings of the vehicle
information display. For additional informa-
tion, refer to “Vehicle information display” in
the “Instruments and controls” section of this
manual.

Opening windows

The Intelligent Key allows you to simultaneously
open windows equipped with automatic opera-
tion.

● To open the windows, press and hold

the

button on the Intelligent Key for

longer than 3 seconds.

The door windows will lower while holding down
the

button on the Intelligent Key.

NOTE:

The windows will stop lowering at the time
the

button is released.

The door windows cannot be closed by
using the Intelligent Key.

Releasing the rear liftgate (if so
equipped)

The rear liftgate can be opened and closed by
performing the following:

● Press the

button (if so equipped) for

longer than 1 second to open the rear lift-
gate.

● Press the

button (if so equipped)

again for longer than 1 second to close the
rear liftgate.

When the

button (if so equipped) is

pressed during the open or close process the
liftgate will reverse.

WPD0414

3-14

Pre-driving checks and adjustments

Advertising