NISSAN 2015 Murano - Owner's Manual - Manual (Page 39)

Stowing the rear center seat belt
When folding down the rear seat, the rear center
seat belt can be retracted into a stowed position
as follows:
1. Hold the connector tongue
᭺
1 so that the
seat belt does not retract suddenly when the
tongue is released from the connector
buckle. Release the connector tongue by
inserting a suitable tool such as a key
᭺
A into
the connector buckle.
2. Insert the seat belt tongue into the retractor
base first
᭺
2 .
3. Then secure the connector tongue into the
retractor base
᭺
3 .
WARNING
● Do not unfasten the rear center seat
belt connector except when folding
down the rear seat.
● When attaching the rear center seat belt
connector, be certain that the seat-
backs are completely secured in the
latched position and the rear center
seat
belt connector is completely
secured.
● If the rear center seat belt connector
and the seatbacks are not secured in
the correct position, serious personal
injury may result in an accident or sud-
den stop.
LRS2530
1-20 Safety—Seats, seat belts and supplemental restraint system