NISSAN 2013 Quest - Owner's Manual - Manual (Page 115)

Black plate (111,1)
[ Edit: 2013/ 3/ 26 Model: E52-D ]
off the headlights for short intervals
(for example, when the vehicle stops at
a traffic signal). This way the life of the
xenon headlights is not reduced.
. If the xenon headlight bulb is close to
burning out, the brightness will drasti-
cally decrease, the light will start
blinking, or the color of the light will
become reddish. If one or more of the
above signs appear, contact a NISSAN
dealer.
SIC3668
HEADLIGHT SWITCH
Lighting
*
1 Turn the switch to the position:
The front parking, side marker, tail, license plate
and instrument lights will come on.
*
2 Turn the switch to the position:
Headlights will come on and all the other lights
remain on.
SIC3669
Autolight system (if so equipped)
The autolight system allows the headlights to be
set so they turn on and off automatically.
To set the autolight system:
1. Make sure the headlight switch is in the
AUTO position *
1 .
2. Push the ignition switch to the ON position.
3. The autolight system automatically turns the
headlights on and off.
To turn the autolight system off, turn the switch
to the OFF,
or position.
The autolight system can turn on the headlights
automatically when it is dark and turn off the
Instruments and controls 2-33
Condition: