NISSAN 2013 Quest - Owner's Manual User Manual

Page 228

Advertising
background image

Black plate (224,1)

[ Edit: 2013/ 3/ 26 Model: E52-D ]

4-44

Monitor, heater, air conditioner, audio, phone and voice recognition systems

Rear air conditioning system

Operating from front control buttons:
To control the rear air conditioning system
independently with the front air conditioner
control panel, push the “REAR” button. When
the rear air conditioning system control is on, the
indicator light on the “REAR” button will
illuminate and “REAR” will appear on the display.

In this state, the rear air conditioning system can
be adjusted with the front air conditioner control
panel. However, if no operation is conducted for
approximately 10 seconds after the “REAR”
button is pushed, the front air conditioner
control panel will automatically switch to the
front air conditioning mode.

To cancel the rear air conditioning mode and
switch back to the front air conditioning mode,
push “REAR” button one more time.

.

Temperature control
Push the temperature control buttons
(“

” and “

”) to set the desired

temperature.

.

Fan speed control
Push the fan speed control “

button or “

” button to control the

fan speed.

.

Air flow control
Push the “MODE” button to change the air

flow mode.

:

The air outlet is fixed at foot level.

:

The air outlet is fixed at both the head and
foot level.

:

The air outlet is fixed at the head level.

NOTE:

Pushing the “A/C” button when the rear air
conditioning system is turned on and
“REAR” does not appear on the display
will turn off the rear air conditioning
system (except when the air flow is set to
the

position).

.

Rear Heating (A/C off)

1. Push the “REAR” button to display “REAR”

on the front display when the rear air
conditioning system is on.

2. Switch the air flow mode to

by pressing

the “MODE” button.

3. If the A/C indicator light illuminates, push the

“A/C” button. (The A/C indicator light will
turn off.)

4. Push the temperature control buttons

(“

” and “

”) to set the desired

temperature between the middle and the
hot position.

.

To dehumidify the air, push the “A/C” button
before turning on the heater.

.

Air does not blow out from the vents on the
ceiling when the system is used for heating.

Turning the system off:
To turn off the rear air conditioner, push the
“ON·OFF” button when “REAR” is on the
display.

Condition:

Advertising