NISSAN 2013 Quest - Owner's Manual User Manual

Page 261

Advertising
background image

Black plate (257,1)

[ Edit: 2013/ 3/ 26 Model: E52-D ]

REPEAT (RPT):

When the RPT play button is pushed while the
CD is played, the play pattern can be changed
as follows:

(CD)

Normal Û 1 Track Repeat

(CD with compressed audio files)

Normal ? 1 Folder Repeat ? 1 Track Repeat ?
Normal

RANDOM (RDM):

When the RDM play button is pushed while a
CD is being played, the play pattern can be
changed as follows:

(CD)

Normal Û 1 Disc Random

(CD with compressed audio files)

Normal ? 1 Disc Random ? 1 Folder Random
? Normal

CD EJECT:

When the CD EJECT button is pushed with the
CD loaded, the CD will be ejected.

When this button is pushed while the CD is
being played, the CD will be ejected.

If the CD comes out and is not removed, it

will be pulled back into the slot to protect
it.

AUX (Auxiliary) input

AUX IN jack:
The AUX IN jack is located on the audio unit.
The AUX IN audio input jack accepts any
standard analog audio input such as from a
portable cassette tape/CD player, MP3 player or
laptop computer.

CD·AUX button:

When the CD·AUX button is pushed with no
device plugged into the jack, the audio system
does not change to the AUX mode.

NISSAN strongly recommends using a stereo
mini plug cable when connecting your music
device to the audio system. Music may not play
properly when a monaural cable is used.

SAA3599

USB memory operation

Audio main operation:
The USB outlet connector is located in the
center console. Open the USB port cover and
connect a USB memory as illustrated. Then,
switch to the USB memory mode automatically.

If the system has been turned off while the USB
memory was playing, pushing the PWR button
will start the USB memory.

Monitor, heater, air conditioner, audio, phone and voice recognition systems

4-77

Condition:

Advertising