NISSAN 2013 Quest - Owner's Manual - Manual (Page 142)

Black plate (138,1)
[ Edit: 2013/ 3/ 26 Model: E52-D ]
2-60 Instruments and controls
JVI0428X
2. Using both hands, simultaneously press and
hold the desired HomeLink ® button and
handheld transmitter button. DO NOT re-
lease until the HomeLink
® indicator light *
1
flashes slowly and then rapidly. When the
indicator light flashes rapidly, both buttons
may be released. (The rapid flashing indi-
cates successful programming.)
NOTE:
Some devices to be programmed may
require you to replace Step 2 with the
cycling procedure noted in the “Pro-
gramming HomeLink
® for Canadian
Customers and gate openers” (P.2-61).
JVI0429X
3. Press and hold the programmed HomeLink ®
button and observe the indicator light.
. If the indicator light *
1 is solid/contin-
uous, programming is complete and your
device should activate when the
HomeLink
® button is pressed and re-
leased.
. If the indicator light *
1 blinks rapidly for
two seconds and then turns to a solid/
continuous light, continue with Steps 4-6
for a rolling code device. A second
person may make the following steps
easier. Use a ladder or other device. Do
not stand on your vehicle to perform the
next steps.
4. At the receiver located on the garage door
opener motor in the garage, locate the
“learn” or “smart” button (the name and
color of the button may vary by manufacturer
but it is usually located near where the
hanging antenna wire is attached to the
unit). If there is difficulty locating the button,
reference the garage door opener’s manual.
5. Press and release the “learn” or “smart”
button.
NOTE:
Once the button is pressed, you have
approximately 30 seconds to initiate
the next step.
6. Return to the vehicle and firmly press and
hold the programmed HomeLink ® button for
two seconds and release. Repeat the
“press/hold/release” sequence up to 3
times to complete the programming pro-
cess. HomeLink
® should now activate your
rolling code equipped device.
7. If you have any questions or are having
difficulty programming your HomeLink ® but-
tons, refer to the HomeLink ® web site at:
www.homelink.com or call 1-800-355-
3515.
Condition: