Replacing -18, Caution – NISSAN 2013 Quest - Owner's Manual User Manual

Page 426

Advertising
background image

Black plate (422,1)

[ Edit: 2013/ 3/ 26 Model: E52-D ]

8-18

Maintenance and do-it-yourself

SDI2694

REPLACING

Replace the wiper blades if they are worn.

1. Pull the wiper arm.

2. Release the lock tab

*

1

and then move the

wiper blade

*

2

as illustrated.

3. Remove the wiper blade.

4. Insert the new wiper blade onto the wiper

arm until it clicks into place.

Contact a NISSAN dealer for wiper blade rubber
replacement.

CAUTION

.

After wiper blade replacement, re-
turn the wiper arm to its original
position; otherwise it may be da-
maged when the hood is opened.

.

Make sure the wiper blades contact
the glass; otherwise the arm may be
damaged from wind pressure.

SDI2693

Be careful not to clog the washer nozzle

*

A

.

This may cause improper windshield washer
operation. If the nozzle is clogged, remove any
objects with a needle or small pin

*

B

. Be

careful not to damage the nozzle.

Condition:

Advertising