Dell POWEREDGE 1950 - Manual (Page 12)

12
Information Update
PCI BIOS failed to
install
PCIe device BIOS (Option
ROM) checksum failure
detected during shadowing.
Cables to expansion card(s)
loose; faulty or improperly
installed expansion card(s).
Reseat the expansion
card(s). Ensure that all
appropriate cables are
securely connected to the
expansion card(s). If the
problem persists, see
"Troubleshooting System
Expansion Cards" in the
Hardware Owner’s Manual.
PCIe Degraded Link
Width Error:
Embedded device
Expected Link Width
is n
Actual Link Width
is n
Faulty system board or riser
board. See "Getting Help" in the
Hardware Owner’s Manual.
PCIe Degraded Link
Width Error:
Integrated device
Expected Link Width
is n
Actual Link Width
is n
The specified PCIe device
is faulty or improperly
installed. For a SAS controller
daughter card, reseat the
card in the dedicated PCIe
connector. See "Installing a
SAS Controller Daughter
Card" in the
Hardware
Owner’s Manual. If the
problem persists, see
"Getting Help" in the
Hardware Owner’s Manual.
PCIe Degraded Link
Width Error: Slot n
Expected Link Width
is n
Actual Link Width
is n
Faulty or improperly
installed PCIe card in
the specified slot. Reseat the PCIe card in the
specified slot number. See
"Expansion Cards" in the
Hardware Owner’s Manual.
If the problem persists,
see "Getting Help" in the
Hardware Owner’s Manual.
PCIe Training
Error: Embedded
device
Faulty system board
or riser board. See "Getting Help" in the
Hardware Owner’s Manual.
Table 1-1. System Messages (continued)
Message Causes Corrective Actions