Dell XPS M2010 (MXP061, Mid 2006) - Manual (Page 102)

10. To easily access the bottom of the computer, lean the display backwards and lay it on a flat surface so that the base is facing you.
11. Push the subwoofer through the top of the computer to remove the subwoofer from its compartment.
12. Detach the internal card with Bluetooth wireless technology (see Removing the Internal Card with Bluetooth Wireless Technology ). Set the card and
cable aside to adhere them to the new subwoofer.
Replacing the Subwoofer
1. Adhere the card with Bluetooth wireless technology (with cable attached) to the new subwoofer.
2. Insert the new subwoofer into the computer base, pushing it firmly into place.
Ensure that the subwoofer cable reaches through to the system board.
3. Slide the subwoofer cover into place, and attach the subwoofer cover to the battery bay using two M2 x 4-mm screws.
4. Lift the display and place the computer base flat on the work surface.
5. Connect the subwoofer cable to the connector on the system board (JWOFR).
6. Connect the cable for the internal card with Bluetooth wireless technology to the connector on the system board (JBT).
7. Replace the top cover (see Removing the Top Cover ).
8. Replace the cosmetic covers (see Removing the Cosmetic Covers ).
1 subwoofer cable and system
board connector
2 cable for the card with Bluetooth technology and
system board connector
1 computer base 2 subwoofer 3 display
NOTICE: To avoid damage to the keyboard, ensure that you attach the keyboard securely before moving the computer.