Dell XPS M2010 (MXP061, Mid 2006) - Manual (Page 54)

10. Lower the back of the assembly slightly and slide it away from the top cover, disconnecting the black round tabs on the assembly from the notches in
the swing arm.
11. Carefully guide the optical drive cable and disk sensor cable through their respective openings in the top cover.
Removing Media from the Optical Drive
If media becomes stuck in the optical drive, you can retrieve the media by opening the drive.
1. Remove the optical drive assembly (see Removing the Optical Drive Assembly .)
2. Remove the optical drive from the optical drive assembly by removing the four M2.0-mm shoulder screws that hold the optical drive to the assembly.
1 top cover (underside) 2 optical drive assembly 3 disk sensor cable
1 notch in swing arm (2) 2 tab on optical drive assembly (2) 3 optical drive cable