Dell XPS M2010 (MXP061, Mid 2006) - Manual (Page 55)

3. Lift the optical drive out of the assembly.
4. Remove the two drive rails from the optical drive by removing the two M2 x 3-mm screws in each drive rail.
5. Remove the optical drive cable from the optical drive by removing the two M2 x 3-mm screws.
6. Remove the four M2.0-mm shoulder screws on the optical drive cover.
7. Slide the top cover away from the front bezel to disengage the tabs, and lift the drive cover off the drive.
8. Remove the media from the drive.
1 M2.0-mm shoulder screws (4) 2 optical drive 3 optical drive assembly
1 optical drive rails (2) 2 optical drive 3 M2 x 3-mm screws on rails (4)
1 M2.0-mm shoulder screws (4) 2 optical drive 3 front bezel