Dell POWEREDGE 1955 - Manual (Page 10)

8
General System Configuration
Figure 1-3. KVM Module Basic Configuration
4 If required, configure the hard drives for RAID 1 or integrated mirroring. Configure RAID 1
prior to installation of the operating system. See "Configuring Drive Mirroring" on page 9
for more information.
NOTE:
If you ordered your server module configured for RAID 1, the drives in your server module
are already configured.
5 If required, set up console redirection on the server module to either the BMC or
to the DRAC/MC module serial port in the server module System Setup program.
See "Serial or Telnet Console Interface" on page 14.
1 monitor 2 custom KVM cable 3 KVM module
4 DRAC/MC module 5 mouse 6 keyboard
1
6
5
3 4
2