System board connectors, Module jumper blocks. see, Table a – Dell PowerEdge 1850 User Manual
Page 3
Advertising
Table A-1. System Board Jumper Settings
System Board Connectors
for the location and description of the system board connectors.
Figure A-3. System Board Connectors
Jumper
Setting
Description
PASSWD
(default)
The password feature is enabled.
The password feature is disabled.
NVRAM_CLR
(default)
The configuration settings in NVRAM are retained at system boot.
The configuration settings in NVRAM are cleared at next system boot.
jumpered
unjumpered
Advertising