Dell PowerEdge 1850 User Manual
Page 54
Advertising
c.
Press the other end of the card until the remaining two standoffs fit over the card edge.
5.
Close the system. See "
Closing the System
" in "Troubleshooting Your System."
6.
Reconnect the system and peripherals to their power sources, and turn them on.
7.
Enter the System Setup program and verify that the setting for the RAC card has changed to reflect the presence of the card. See "Using the System
Setup Program" in your User's Guide.
See the RAC card documentation for information on configuring and using the RAC card.
Back to Contents Page
Advertising