Inside the system, Control panel, Replacing the system cover – Dell PowerVault 725N (Rackmount NAS Appliance) User Manual
Page 27
Advertising
Replacing the System Cover
1.
Ensure that you did not leave tools or parts inside the system.
2.
3.
Tighten the thumbscrew at the back of the system to secure the cover.
Inside the System
, the system cover and front panel are removed to provide an interior view of the system.
Figure 4-3. Inside the System
The system board holds the system's control circuitry and other electronic components. Several hardware options such as the processors and memory are
installed directly on the system board. The system board can accommodate two PCI expansion cards.
The hard-drive bays provide space for up to four IDE hot-plug drives. Power is supplied to the backplane board, the system board, and internal peripherals
through a power supply.
Advertising