Dell PowerVault 725N (Rackmount NAS Appliance) User Manual
Page 50
5.
Reconnect your system and peripherals to their electrical outlets, and turn on the system.
The password clears.
6.
Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
7.
Remove the cover. See "
Removing the System Cover
."
8.
Move the jumper plug back to its original position.
9.
Replace the cover. See "
Replacing the System Cover
."
10.
Reconnect your system and peripherals to their electrical outlets, and turn on the system.
The system has no password protection. See "
" for information about setting the password.
Back to Contents Page
NOTICE:
When you turn off the system, press the power button for less than 2 seconds. If you press the power button for longer than 3 seconds, the
system will automatically rebuild the RAID arrays the next time the system is turned on. This could impact system performance for several hours.