Dell PowerVault 725N (Rackmount NAS Appliance) - Manual (Page 48)

Power Screen
Table 6 -4 lists the options for the information fields that appear in the Power screen. Use this screen to set parameters for system power management
operation.
Table 6-4. Power Screen Options
Boot Screen
Table 6 -5 lists the options for the information fields that appear in the Boot screen. Use this screen to modify the boot sequences of the internal hard drives.
Table 6-5. Boot Screen Options
Security Screen
Table 6 -6 lists the options for the information fields that appear in the Security screen. Use this screen to enable the supervisor and user passwords.
Table 6-6. Security Screen Options
Exit Screen
Table 6 -7 lists the options for the information fields that appear in the Exit screen. Use this screen to save or discard any changes to the System Setup utility
and default settings.
Table 6-7. Exit Screen Options
Updating the BIOS
Option Description
AC Power Failure Sets the power state after a shutdown caused by an unexpected interruption in AC power. If the value is set to Last State, the system
returns to the last power state.
Power Button
Mode
Enables or disables the system from booting using the power button.
Option Description
Boot Device Priority Determines where and in which order the system looks for a bootable operating system each time it is started.
Hard Disk Drives Selects the boot sequence of the hard drives.
Option Description
Change System Password Sets a system password.
Clear System Password Clears a system password.
Option Description
Exit Saving Changes Saves any changes that you made in the System Setup utility and exits.
Exit Discarding Change Exits the System Setup utility and does not save any changes you made.
Load Optimal Defaults Configures the settings in the System Setup utility that will provide your system with the best performance.
Discard Changes Discards any changes you made to the System Setup utility.