Figure 4, Backplane connector. see, Installing the power supply – Dell PowerVault 725N (Rackmount NAS Appliance) User Manual

Page 31

Advertising
background image

Figure 4-8. Removing and Replacing the 230-W Power Supply

 

Figure 4-9. Removing and Replacing the 250-W Power Supply

 

 

Installing the Power Supply

 

1.

 

To install the replacement power supply, insert the rear guide pins on the power supply into the guide-pin slots on the chassis, lower the power supply

CAUTION:

See your System Information Guide for complete information about safety precautions, working inside the computer, and protecting

against electrostatic discharge.

Advertising
See also other documents in the category Dell Computer hardware: