Dell Latitude E6500 (Mid 2008) - Manual (Page 23)

Replace the display panel brackets if you removed them (see Replacing the Display Panel Brackets ).
Replacing the CCFL Display Panel
1. Connect the display cable to the connector on the back of the display panel.
2. Route the display cable around the notch on the display cover and set the display panel in place.
3. Connect the inverter backlight cable to the inverter.
4. Replace the two M2.5 x 5-mm screws securing the display panel to the display cover.
5. Replace the display bezel (see Replacing the Display Bezel ).
6. Replace the display assembly (see Replacing the Display Assembly ).
Replacing the LED Display Panel
1. Connect the display cable to the connector on the back of the display panel.
2. Route the display cable around the notch on the display cover and set the display panel in place.
3. Replace the four M2.5 x 5-mm screws securing the display panel to the display cover.
4. Replace the display bezel (see Replacing the Display Bezel ).
5. Replace the display assembly (see Replacing the Display Assembly ).
1 display panel 2 display cover
3 display cable
1 display panel 2 display cable
3 display cover