Replacing the power module – Dell Latitude E6500 (Mid 2008) User Manual
Page 49
Replacing the Power Module
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the
Regulatory Compliance Homepage at: www.dell.com/regulatory_compliance.
1.
Position the DC power cable in the base assembly, aligning the guides on the connector sides with the base.
2.
Connect the DC power cable to the system board (see illustration in
3.
Replace the system board (see
Replacing the System Board Assembly
).
4.
Replace the card cage (see
Replacing the Card Cage
).
5.
Replace the palm rest (see
Replacing the Palm Rest Assembly
).
6.
Replace the right-speaker/fingerprint reader cover (see
Replacing the Right-Speaker and Fingerprint Reader Cover
).
7.
Replace the processor thermal-cooling assembly (see
Replacing the Processor Thermal-Cooling Assembly
).
8.
Replace the keyboard (see
Replacing the Keyboard
).
9.
Replace the LED cover (see
Replacing the LED Cover
).
10.
Replace the display assembly (see
Replacing the Display Assembly
).
11.
Replace the hinge covers (see
Replacing the Hinge Covers
).
12.
Replace the optical drive (see
Replacing the Optical Drive
).
13.
Replace the hard drive (see
Replacing the Hard Drive
).
14.
Replace the bottom of the base assembly (see
Replacing the Bottom of the Base Assembly
).
Back to Contents Page
1
DC power connector
2
DC power cable