Dell PowerEdge C8000 - Manual (Page 29)

Installing System Components 29
Closing the Sled
1 Push the hard-drive cage all the way into the sled until the hard-drive cage
release latch snaps into place. See Figure 2-2.
2 If you pulled the hard-drive cage to the fully extended position, slide the
rail release latches on each side of the hard-drive cage and push the hard-
drive cage into the sled until it locks into place. See Figure 2-3.
Figure 2-3. Closing the Fully Extended Hard-Drive Cage
1 rail release latches (2) 2 hard-drive cage
3 storage sled
1
2
3