Dell PowerEdge C8000 - Manual (Page 30)

30 Installing System Components
Removing a Sled
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
CAUTION: To ensure proper airflow in the system, if a module is removed it
should be immediately replaced with another sled or sled blank.
CAUTION: Operating the system without a sled or sled blank installed can cause
the PowerEdge C8000 server enclosure to overheat. See "Installing a Sled Blank"
on page 32.
1 Pull and hold the storage sled release tab at the bottom of the sled to
disengage the sled from the server enclosure. See Figure 2-4.
2 Using the handle, slide the sled out of the enclosure. See Figure 2-4.
Figure 2-4. Removing and Installing a Sled
1 sled release tab 2 handle
1
2